10,000 lb Galvanized 4-Piling Boat Lift

The 10,000 lb. Galvanized 4-Piling Boat Lift is the perfect solution for boat owners who want to keep their vessels safe and secure while docked. With a lifting capacity of 10,000 lbs, this lift is designed to mount on the tops of four dock pilings, making it a sturdy and reliable option for any dock. This boat lift features a compounded configuration with a 31 ft. cable.

Its all-welded design and hot-dipped galvanized finish make it durable and long-lasting, even in harsh marine environments. The 10,000 lb. Galvanized 4-Piling Boat Lift comes with (2) 3/4 HP 110v electric motors for each top beam, as well as (2) 4,000 lb. gear plate assemblies. It also features (2) maintained drum switches and an in-line GFCI control cable for added convenience and safety.

For a reliable and durable boat lift that will keep your vessel safe and secure, choose the 10,000 lb. Galvanized 4-Piling Boat Lift.

Please note that this product does not come with piling mount bolts or cradle bunks.

Includes
(2) Elite Motors 3/4 HP motors w/ maintained drum switches, GFCIs, and 16 & 45-foot control cable
(2) 12K 13 ft. galvanized top beams with dead man brackets
(1) 16 in. chock angle kit
(4) Guidepost stanchions, PVC pipe, and black 48 in. split bumpers
(2) 4,000 lb. standard powder-coated gear plate assemblies w/ hoist covers
(1) 6K fastener kit
(4) 31 ft. x 5/16 in. 7 x 19 aircraft cable

CRADLE WIDTH MEASUREMENT
The 6,000 lb. galvanized boat lift comes with standard 12 ft. 6 in. cradle beams. If your pilings are already installed, it is very important to get an accurate center-to-center measurement between the pilings. This measurement will determine the cradle length you will need to order. If the center-to-center measurement is 12 ft. 6 in., then you will need a cradle length of 12 ft. 6 in. If the correct length of boat cradles are not installed there can be issued with how the boat lift operates.

PILING DEPTH
The 8 in. pilings need to be installed with sufficient seabed penetration to support the weight of the boat. Pilings must be square and level to each other. The two drive-end pilings (the pipings where the boat hoists are mounted) should be 6 in. shorter than the other two pilings. Any movement of the pilings after installation will adversely affect boat lift operations and safety.

A. HOIST SECUREMENT
BH-USA flat-plate boat hoists are attached to the top beam with 1/2 in x 1 1/2 in bolts (included). Initially, mount the back of the flat-plate cover between the gear plate and the top beam. Align the hole in the drive pipe with the hole in the large gear sleeve. Set the gear sleeve bolt in place and snap the front cover into the back cover.

B. BOAT HOIST CONTROL CABLE
One of the flat-plate boat hoists is wired with an extra cable (45 ft) so that both drum switches can be mounted side-by-side. It is not recommended to wire both flat-plate hoists to one drum switch. For double motorboat lifts, we recommend using the GEM Remotes GR2 double motor boat lift remote. One to two boat lift motors can be operated simultaneously. It was designed to operate this type of lift.

C. TOP BEAM SECUREMENT
Utilize lag or through bolts to secure the top beams to the pilings. Piling attachment bolts are not included.

D. CABLE INSTALLATION
The 10,000 lb & 12,000 lb galvanized boat lifts will come with 123 ft of boat lift cable. Unlike the 6,000 lb and 8,000 lb beams, the 10,000 lb & 12,000 lb beams have deadman brackets welded to each beam to attach your boat lift cable. Compounding blocks are included with boat cradles.

Installation is required. This unit should be assembled by experienced contractors or professionals familiar with boat hoist assembly and installation. Improper installation and maintenance may void the manufacturer’s warranty. The assembly/use instructions should be read and examined before operation.

EACH BH-USA BOAT LIFT IS INDIVIDUALLY CRATED AND SHIPPED VIA MOTOR FREIGHT. IT IS THE PURCHASER’S RESPONSIBILITY TO ARRANGE FOR A DELIVERY ADDRESS THAT IS ACCESSIBLE TO THE FREIGHT COMPANY AND HAS A FORK TRUCK AVAILABLE FOR UNLOADING. CUSTOMERS WILL BE REQUIRED TO UNLOAD CRATES BY HAND IF FORK TRUCKS ARE NOT AVAILABLE. IN ORDER TO FACILITATE THE DELIVERY, BH-USA WILL REQUEST A CALL FROM THE FREIGHT COMPANY TO THE CUSTOMER. MISSED DELIVERIES MAY INCUR EXTRA FREIGHT CHARGES THAT WILL BE THE BUYERS’ RESPONSIBILITY.

THE PURCHASER MUST BE PRESENT AT THE TIME OF DELIVERY. SEE OUR SHIPPING TERMS AND CONDITIONS FOR MORE INFORMATION.