SKU:
Protect your jet ski or personal watercraft with a rugged 1,200 lb PWC lift built for easy shoreline access and long-term waterfront use. The Boat Lift Warehouse PWC Lift is available in dock mount or pile mount configurations, with 5 ft, 7 ft, or 10 ft travel and your choice of manual, belt drive, or direct drive operation.
Designed with the DIY waterfront homeowner in mind, this lift ships mostly assembled and is built from welded marine-grade aluminum to help keep your PWC high, dry, and ready for the next ride.
Safe payments with trusted SSL protection
Need Help?
Not sure which option, product or configuration fits your shoreline?
Call 877-468-5438
The Boat Lift Warehouse 1,200 lb PWC Lift is a dependable, easy-to-use lift for homeowners who want a better way to store and protect their personal watercraft. Instead of leaving your jet ski tied to the dock, floating in the water, or exposed to wake movement, this lift raises your PWC out of the water for cleaner storage, easier access, and added peace of mind.
Built from welded marine-grade aluminum, this PWC lift is designed for waterfront environments where strength, corrosion resistance, and low maintenance matter. With a 1,200 lb lifting capacity and the ability to support most personal watercraft up to 5 ft wide, it is a strong fit for many popular jet ski, Sea-Doo, and WaveRunner models.
Choose the setup that fits your dock and water conditions. The lift is available as either a dock mount PWC lift or a pile mount PWC lift, with 5 ft, 7 ft, or 10 ft travel options. For operation, select a simple manual winch, or upgrade to a belt drive or direct drive motorized hoist for push-button convenience.
This lift is also a smart choice for DIY-minded waterfront homeowners. Most of the unit arrives assembled, including bunks and hardware, helping reduce installation time and making the project more manageable for experienced do-it-yourselfers. If you are unsure which mount, travel length, or hoist option is best for your shoreline, Boat Lift Warehouse can help you select the right configuration before you order.
You want to mount the lift directly to a structurally sound dock and do not have a suitable piling in the correct location. This is often the preferred option for straightforward residential dock installations.
You have a properly positioned piling and want the lift mounted to that piling instead of the dock surface. The piling must extend at least 26 inches above the dock.
You have relatively stable water levels and only need moderate clearance to lift your PWC out of the water.
You deal with more water movement, a higher dock, changing water levels, or want additional lift height for peace of mind.
You need maximum vertical lift due to dock height, tidal changes, deeper water, or challenging shoreline conditions.
You want a lower-cost setup, do not have dock power available, or only use the lift occasionally.
You want easier operation, use your PWC frequently, or prefer the convenience of a motorized lift.
| Capacity | 1,200 lbs |
|---|---|
| Mounting Options | Dock mount or pile mount |
| Travel Options | 5 ft, 7 ft, or 10 ft |
| Drive Options | Manual winch, belt drive, or direct drive |
| Motor Options | 1 HP 56 frame direct drive or 0.75 HP 48 frame belt drive |
| Mast | .19/.29 x 4" x 6" aluminum I-beam |
| Mast Lengths | 8 ft, 10 ft, or 13 ft long |
| Housing Assembly | 1/4" x 6" square tube |
| Dock Mount Base | 16" x 12" |
| Lifting Cable | 1/4" x 18 ft or 1/4" x 26 ft stainless steel double-pull cable |
| Bunks | 2" x 4" x 53" carpeted treated wood |
| Cradle Tubes | 1/4" x 4" square tube |
| Arm Tubes | 1/4" x 3" square tube |
| Overall Arm Width | 42.5" |
| Arm Length | 55" |
| PWC Width Fit | Fits personal watercraft up to 5 ft wide |
| Pile Mount Requirement | Piling must extend at least 26" above the dock |
Materials provided were overall of a Good Quality. Build instructions need additional detailed information. One particular omission cost me 2 additional hours to undo then redo what was needed to install the White Plastic Hoist Motor Cover. Also, When installing the Hoist motor on the Steel plate it states I am to use a 2.5" x 1/2" SS Bolt, when you really need a 3.0" x 1/2" SS Bolt. Very pleased it is American Made. Tom Reznicek
