Direct Drive 40:90 2in. Drive Shaft Kit

A-Drive 40:90 Drive Shaft Kit

The A-Drive 40:90 2-inch Drive Shaft Kit is designed to mount into the drive pipe section of the 40:90 double worm reducer gearbox. The driveshaft end with the input tab slides into the double worm reducer gearbox. Using the mounting holes on the opposite side of the drive shaft, attach the drive pipe with the bolt and nut provided. Made from hardened steel then zinc-plated for protection against marine conditions. The driveshaft will accept a KALS Limit Switch.

Kit Includes:
(1) A-Drive 40:90 Double Worm Reducer Gearbox Drive Shaft w/Input Tab
(1) 1/2″ x 3 1/2″ Zinc-Plated Grade 5 Hex Head Bolt
(1) 1/2″ Zinc-Plated Nylock Nut

• Attaches direct drive boat hoist to a drive pipe
• Made from hardened steel then zinc-plated
• Withstands marine environments
• Fits BH-USA A-Drive Direct Drive Hoist systems
• Machined tab input
• Drive Pipe ID: 2 in.
• Weight: 8.55 lbs.
• Dimensions: 13 1/4 in. x 1 7/8 in. x 1 7/8 in.
• Input: 1 7/8 in. x 1 3/8 in. x 5/8 in.
• Output: 8 7/8 in. x 1 7/8 in. x 1 7/8 in.
• Mounting Hole Amount: 2
• Mounting Hole Size: 1/2 in.
• Keystock Groove: 4 in. x 1/4 in.
• Keystock Size: 3 5/8 in. x 1/4 in. x 1/4 in.