The Dual Pillow Block Pipe Support Center Mount Bracket with Pillow Blocks is the ultimate solution for center mount boat lifts. This kit is designed to provide unparalleled support for your drive pipe, ensuring smooth and quiet operation for years to come. The Dual Pillow Block Hanger Bracket included in the kit can hold two 2 7/16 in. cast iron ball-bearing pillow blocks, eliminating the friction that may be created with other pipe supports that use standard sleeves.
The 2 7/16 in. Pillow Block bearing is a pedestal used to provide support for a rotating shaft with the help of compatible bearings & various accessories. Made from cast iron housing with a chrome steel ball-bearing insert. Features (2) 3/4 in. mounting holes, a powdercoated green finish. and a 2 7/16 in. bearing bore. It also includes 1/4 in. press-in grease fitting mounted off-center.
Dual pipe supports, with or without a hoist hanger, are best used in a center mount configuration. A 4,000 lb. maximum rating per hoist hanger when used correctly in center mounting. Side mounting greatly reduces the dual pipe support and hoist hanger capacity. A 1,000 lb. maximum rating when used correctly in side mounting.
Its sturdy construction ensures that your lift will operate smoothly and quietly while greatly reducing the chances of the unit getting into a bind. This kit can be easily mounted to virtually any overhead wood beam with its adjustable brackets, making it a versatile solution for any boat lift.
Add an optional cable winder and make lifting your boat smooth and easy. Installation: Center Pipe Lift only.
Invest in the Dual Pillow Block Pipe Support Kit and enjoy the peace of mind that comes with a reliable and efficient boat lift. Get yours today and experience the ultimate support for your center-mount boat lift.
Wood beam mounting fasteners not included.
Product Information
| Property | Value |
|---|---|
| Material | Steel |
| Finish | Hot-dipped galvanized |
| Wood Beam Mounting Brackets | 2 |
| Bracket Type | L brackets |
| Mounting Holes (per bracket) | 3 |
| Mounting Hole Size | 1/2 in. |
| L-Bracket Mounting Slots | 4 |
| Mounting Slot Size | 1 1/2 in. L x 9/16 in. W |
| Pillow Block Mounting Holes | 4 |
| Mounting Hole Size | 3/4 in. |
| Hole Location | Center of Flat Plate |
| Distances Between Holes (Center-to-Center) | 7 1/4 in. |
| Plate Edge to Mounting Hole | 1 3/16 in. |
| Fits Drive Pipes | 2 3/8 in. OD (2 in. ID) |
| Pillow Block Bore Diameter | 2 7/16 in. |
| Bearing Insert Type | Ball |
| Locking Type | Set Screw |
| Housing Material | Cast Iron |
| Bearing Insert Material | Chrome Steel |
| Number of Bolts | 2 |
| Bolt Size | 3/4 in. |
| Bolt Hole Center to Center | 7.25 in. |
| Mounting Surface to Shaft Center | 3 in. |
| Overall Height | 5.50 in. |
| Overall Width | 2.62 in. |
| Overall Length | 9.50 in. |
| Dynamic Load Capacity | 12,927 lbs. |
| Static Load Capacity | 8992 lbs. |
| Finish | Painted |
| Standards | ISO |
| Center Mount Maximum Rating | 4,000 lbs. |
| Side Mount Maximum Rating | 1,000 lbs. |
