Elite Pre-wired Motor Side1 Thumbnail Image

Elite Pre-wired Motor Side2 Thumbnail Image

Elite Pre-wired Motor Front Thumbnail Image

Elite Pre-wired Motor back Thumbnail Image

SKU:

Elite Pre-Wired Motors

Write a Review

$473.59 - $653.00

Quantity:

Adding… The item has been added

Safe payments with trusted SSL protection

Take advantage of how easy it is to just bolt on and plug in one of these Elite Pre-Wired Boat Lift Motor. The Elite Pre-Wired Motor is a NEMA Motor that is UL Listed and CSA approved. This boat lift motor has an enclosed, non-vented housing to prevent anything from going into the motor. The enclosed housing will keep your motor working properly and will prolong the service life of the motor.

All of our Elite Pre-Wired Motors are standard duty, single phase with a capacitor start. The Elite 56 frame motor has a 5/8" shaft and is compatible with most flat-plate, belt-driven hoist. Please note this motor is wired for 110 volts only!

The Elite Pre-Wired Motor comes with a 16' GFCI harness, spring or lock-on Switch, and a 2-in pulley.

All pre-wired boat lift motors are wired and inspected by our on-site wiring technician before it’s shipped out of our facility. These pre-wired motors will make your job fast and easy, just bolt on and plug in!

This item is in stock and typically ships in 1-2 days.

General Specifications

Style: With Base	Enclosure: TENV
Weight: 20.55 lbs.	Individual Box Size: 15 in. x 10 in. x 10 in.
Product Length: 10.75 in.	Product Width: 6.75 in.
Product Height: 8.50 in.	Shaft Width: 0.625 in.
Shaft Length: 2 in.	Country of Origin: China

Nameplate Specifications

HP:	0.75 (3/4)	Voltage:	Dual (115v / 230v)
Phase:	1	Amps:	10.8 (115v) / 5.4 (230v)
RPM:	1725	Hz:	60
Frame:	56	Service Factor:	1.0
SFA:	N/A	Type:	C
AMB:	40°c	Time:	15 MIN
HSG:	TENV	Code:	L
Insulation:	B	Thermally Protected:	None
UL:	Recognized	UL Stamp:	C-UL-US

Technical Specifications

Electrical Type:	Capacitor Start	Rotation:	Selective
Shaft Type:	NEMA 56	Shaft Extension:	1.88 in.
Frame Length:	7.1875 in.	Mounting:	Resilient Base – Extended Studs
Drive End Bearing:	Ball	Opp Drive End Bearing:	Ball
Frame Material:	Rolled Steel	Replacement Capacitor:	465 uF
Capacitor SKU #:	BH02247	Key stock:	Included
Key stock Length:	1 5/16 in.	Key stock Width:	3/16 in.

Boat Lift Switch Specifications

Maintained		Momentary
Model #:	CA0200034I-B96IQ6R	Model #:	CA0200037I-B96IQ6R
Retail SKU #:	BH09014	Retail SKU #:	BH09015
Weight:	1.25 lbs.	Weight:	1.25 lbs.
Box Color:	Light Grey	Box Color:	Light Grey
Housing Length:	4.5 in.	Housing Length:	4.5 in.
Housing Width:	3.5 in.	Housing Width:	3.5 in.
Housing Height:	4.5 in.	Housing Height:	4.5 in.
Handle Color:	Red	Handle Color:	Red
Handle Length:	3.0 in.	Handle Length:	3.0 in.
Handle Width:	1.1875 in.	Handle Width:	1.1875 in.
Handle Height:	1.3125 in.	Handle Height:	1.3125 in.
Country of Origin:	Italy	Country of Origin:	Italy

Technical Specifications

Maintained		Momentary
Amps:	20	Amps:	20
VAC	600	VAC	600
Torque:	Tight	Torque:	Tight
Certification:	EN 60947-3	Certification:	EN 60947-3
Certification:	CE	Certification:	CE
Certification:	C-UL-US Listed	Certification:	C-UL-US Listed

GFCI Wire Harness Specifications

110v		220v
Manufacturer:	Southwire Company	Manufacturer:	Southwire Company
Plug Type:	3-US 110 V Standard	Plug Type:	US 240 Volt NEMA 6-15
VAC:	125	VAC:	240
Hz:	60	Hz:	50/60
Amps:	15	Amps:	15
Watts:	1875	Watts:	3600
Type:	Rainproof Class A	Type:	Rainproof Class A
GFCI Type:	In-line	GFCI Type:	In-line
Cable Type:	14/5 SJTW	Cable Type:	14/5 SJTW
GFCI to Plug:	4.5 in.	GFCI to Plug:	4.5 in.
Cord Diameter Range:	0.28 – 0.65 in.	Cord Diameter Range:	0.28 – 0.65 in.
Country of Origin:	Honduras	Country of Origin:	Honduras
UL:	Listed	UL:	Listed
CSA:	Certified	CSA:	Certified
Reset Button:	Yes	Reset Button:	Yes
Reset Type:	Automatic	Reset Type:	Automatic