ACE 110 Offset Hanger Bracket

$37.07

-

ACE 110 Offset Hanger Bracket

Description

The Original ACE 110 Offset Hanger Bracket mounts on the flange of a steel beam. It allows cable termination or deadman point when compounding on the same metal beam as the drive pipe and hoist. Made from hot-dipped galvanized steel. Designed with a 90-degree turn radius. The offset allows cable termination without interfering with the drive pipe.

Who is Ace Labs?
Ace Labs, based out of Venice, Florida & Pataskala, Ohio, is regarded as the grandfather of the boat lift industry. Boat Lift Warehouse now offers some of its original parts. These parts have not been available since Ace Labs closed its doors.

Specifications
Overall Dimensions: 4 1/2 in. L x 2 in. W x 4 5/8 in. H
Material: Steel
Finish: Hot-dipped galvanized
Clamp Dimensions: 2 in. L x 1/4 in. W x 2 in. H
Clamp Maximum Opening: 3.15 in.
Clamps to: Steel I-beams
Cable Termination Hole Size: 5/8 in.
Flat Bar Size: 2 1/2 in. L x 3/8 in. W x 2 1/2 in. H
Flat Bar Style: L -shaped
Sleeve Size: 3/4 in.
Sleeve Type: Sch. 80
Sleeve Bolt Type: Hex head
Sleeve Bolt Material: Galvanized
Sleeve Bolt Size: 1/2 in. x 7 in.
Sleeve Bolt Thread Type: All thread
Sleeve Bolt Amount: 1
Flat Washer Material: Galvanized
Flat Washer Size: 1/2 in.
Flat Washer Amount: 2
Lock Washer Material: Galvanized
Lock Washer Size: 1/2 in.
Lock Washer Amount: 1
Nut Material: Galvanized
Nut Size: 1/2 in.
Nut Amount: 1

Product Overview

  • Original Ace Labs 110 cable offset bracket
  • Used on standard steel I-beams
  • Hot-dipped galvanized steel
  • Compounding bracket for cable termination
  • 90-degree turn radius
  • Offset allows cable termination w/o interfering with the drive pipe

Reviews

There are no reviews yet.

Be the first to review “ACE 110 Offset Hanger Bracket”