Dual Pipe Support for Steel Mounting

The Dual Pipe Support for Steel Mounting is for a center overhead beam mount. A reliable solution for secure, no-drill installation on steel I-beams, tubing, or channel. Built from hot-dipped galvanized steel, it ensures lasting durability and easy maintenance.

• “Sandwiches” the beam for strong support without drilling
• Individual sleeves prevent pipe movement
• Over 19" between sleeves for optional cable winder
• Grease fittings are easily accessible

All mounting fasteners are included, making setup straightforward and stress-free.

I-Beam measurement is from bottom of I-beam to top.

Recommended for center-mount or twin mount. Always follow the BH-USA Overhead Boat Lift Guide. BH-USA does not recommend overhead boat lifts for boats weighing more than 12,000 lbs. Only use the full length of the pipe to connect both pipe supports.

Center-mount pipe supports are only recommended for center mount or twin mount installations, never use a center mount pipe support on a side mount installation. Never attempt to straight-line lift any more than 4500 lbs on a side mount overhead lift or straight line more than 6000 lbs on center or twin mount lifts. Only use the full length of the pipe to connect both pipe supports.

Do not attempt to use two short pieces of the drive pipe. If designing or engineering your own overhead lift you must download and read the BH-USA overhead lift guide. We strongly recommend buying a kit over designing and engineering a lift on your own.

The above ratings of the dual pipe supports are only valid if installing or using the pipe supports in accordance with the BH-USA overhead lift guide. The Side Mount and Twin Mount ratings are based on straight line pull, by compounding the cable you will increase the rating. Rating is based PR pipe support and not pr lift. When considering the weight of your boat you must use full wet weight plus the weight of cradle.