GEM GR2F1 Two Lift Remote - 1 Motor Each

GR2F1 2-for-1 Boat Lift Remote

The GR2F1 2-for-1 Boat Lift Remote is a standard line of controls equipped with a 30 amp control relay. You can run (2) single motor lifts with one controller. Run (2) single-point davits Individually or together. (2) independent motor leveling switches. Accommodates optional multiple transmitters for the boat lift remote. The control box features a black water-resistant gasket. The control faceplate has raised buttons for operation and one toggle switch that regulates power to the remote.

Online wiring and troubleshooting guide diagrams for each model can be found under the instructions tab. FFC & ETL listed. Compatible with any single-phase electric boat lift motor. Remove the existing drum switch and easily install the remote. Includes diagrams for all known boat lift motors.

3-Button Transmitter

The 3-Button Transmitter is sold with Gem Remote systems since March 2007. Water-resistant and floats. The transmitter works on radio frequency not the line of sight. Operates up to 300 feet away from the control box. Frequency 372. The remote dimensions are 2.8 in. x 1.8 in. Includes (2) 3V batteries (CR2032). Will not work with units pre-March 2007.

Requires manual selection of which boat lift will "live" at the GEM box. You cannot select this from the key-fob.

Weight: 10 lbs

Box dimensions: 8 1/2 in. L x 6 in. W x 10 1/2 in. H

Remote Transmitter Size: 2 1/2 7 in. x 1 1/4 7 in.

Motors Controlled: Two Motors

Dual Voltage: 110v / 220v

Transmission: Radio (not line of sight)

Lockable Case: Yes

Leveling Switch: Yes

Max AMP: 30 AMP control relay

Max range: 300 ft

Compliant: FCC & ETL

Warranty: 1-year Manufacturer's Warranty

• Run Two Single Motor Lifts With One Controller
• Run Two Single Point Davits Individually or Together
• (2) Independent Motor Leveling Switches
• Three Button Hand Held Radio transmitter

• GEM-Remotes-Installation-Guide
• GEM-Remotes-Auto-Stop-Limit-Switch-Instrallation-Guide