SKU: BH-02180

ACE 106 Flat-Plate Hoist Hanger

Adding… The item has been added

Safe payments with trusted SSL protection

The Original ACE 106 Flat-Plate Hoist Hanger mounts a flat-plate hoist to the flange of a steel I-beam. Tightening the clamps on the steel beam flange secures it to the hoist. The hoist and drive pipe should run parallel with each other.

Made from hot-dipped galvanized steel. Features (2) 5/8 in. standard flat-plate mounting holes. The mounting holes allow a 1/2 in. hex head bolt to mount the flat-plate hoist.

Install vertically with the wired electric motor at the bottom of the gear plate.

Fits a standard gear plate mounting hole design. It fits all BH-USA, AMS Hefty Hoists, & American Power Hoists gear plates.

Who is Ace Labs?
Ace Labs, based out of Venice, Florida & Pataskala, Ohio, is regarded as the grandfather of the boat lift industry. Boat Lift Warehouse now offers some of its original parts. These parts have not been available since Ace Labs closed its doors.


Overall Dimensions: 11 1/4 in. L x 2 1/2 in. W x 4 5/8 in. H

Material: Steel

Finish: Hot-dipped galvanized

Clamp Dimensions: 2 in. L x 1/4 in. W x 2 in. H

Clamp Maximum Opening: 3.15 in.

Clamps to: Steel I-beams

Mounting Hole Size: 5/8 in.

Purpose: Flat-plate hoist hanger

Flat Bar Style: Angled steel

Sleeve Size:3/4 in.

Sleeve Type: Schedule 80

Sleeve Bolt Type: Hex head

Sleeve Bolt Material: Galvanized

Sleeve Bolt Size: 1/2 in. x 7 in.

Sleeve Bolt Thread Type: All thread

Sleeve Bolt Amount: 1

Flat Washer Material: Galvanized

Flat Washer Size: 1/2 in.

Flat Washer Amount: 2

Lock Washer Material: Galvanized

Lock Washer Size: 1/2 in.

Lock Washer Amount: 1

Nut Material: Galvanized

Nut Size: 1/2 in.

Nut Amount: 1

Product Overview

  • Steel I-beam mounting clamps
  • Fits industry-standard gear plates
  • Made from hot-dipped galvanized steel
  • (2) 5/8 in. mounting holes that accept 1/2 in. bolts
  • Vertical mount only