null

SKU:

Front Mount Boat Lifts

Request price estimate below

Safe payments with trusted SSL protection

If you have an oddly shaped slip or dock, Hydrohoist designed the UltraLift Series Front Mount to be compatible with U-shaped slips, double wide slips, and L-shaped moorings. If you have an extra wide slip it can also provide extra room for a pwc, fishing skiff, or even space to fish off your dock.

The Front Mount boat lift mounts to the front of your dock with two dock brackets. These brackets hold the front of the frame in place with solid-steel circular-pivots and allow the back of the boat lift to lower. The two side brackets that are attached to the side of the dock support the lift when it is in the down position. This leaves the boat lift in a slanted position with the back of the lift submerged underwater, basically just like a trailer backed down a ramp. You then drive your boat up the lift just like a trailer backed into the water. The polymer cradles hold your boat in place while you let the blower motor raise your boat and steel frame completely out of the water. The side brackets that stop your lift from going down too far are solid steel and mounted to the dock inner-frame. When the lift is in the upright position the side brackets which now look like a capital "T," are actually applying up pressure to your dock. With your boat lift locked in the upright position, you are virtually adding extra floatation to your dock and combining your boat lift and dock as one. This makes the Front Mount boat lift the ultimate boat lift for rough water because your boat lift and boat will only move as much as your dock does.

  • Capacity from 5,000-6,500 pounds
  • Ideal for shallow, rough, choppy, or high action water scenarios
  • Virtually maintenance-free
  • The rear of the lift lowers underwater to allow loading of the boat as easily as pulling onto a trailer
  • Strengthens and adds buoyancy to the dock, while simultaneously protecting your boat
  • Special recycled polymer cradles never rot or mildew and are skid-resistant, waterproof, and will never crack, chip, or splinter
  • Unique safety features to ensure the wellbeing of loved ones and your boat
  • Minimal metal in water creates a less corrosive environment
  • Solid-steel, hot-dipped galvanized frame for extra durability in rough water
  • Ultra-tough polyethylene tanks
  • Unique safety features to ensure the health of loved ones and your boat

For information and pricing on a Front Mount boat lift please fill out the request an estimate form and we will put you in touch with a dealer.

  • All steel above the waterline
  • Precision design & custom molded polyethylene tanks
  • Full width 4″ frame channel with 3″ adjustable expansion channel
  • Heavy-duty 1/4″ torsion bars
  • 5″ high-density polypropylene square hole bushings
  • Heavy-duty hull system
  • Grade-8 pivot hardware
  • Structural grade dock brackets with molded bumper guards
  • Two-piece stainless/polyethylene pitman bushings
  • Padded step pitmans