Free Shipping
SKU: 1027850
ShoreMaster 1296 Vertical PWC Lift
Write a Review
ShoreMaster 1296 Vertical PWC Lift
The ShoreMaster 1296 Vertical PWC Lift is a wide-body, 1,200 lb personal watercraft lift built for larger Sea-Doos, WaveRunners, Jet Skis, and premium PWC models. With a 96" inside width, welded aluminum construction, 50" lift travel, and canopy compatibility up to 21', it is a strong choice for owners who want dependable dry storage, easier launching, and long-term protection at the dock.
$3,276.00
Safe payments with trusted SSL protection
Need Help?
Not sure which option, product or configuration fits your shoreline?
Call 877-468-5438
-
Built for Larger PWCs and Changing Water Levels
The ShoreMaster 1296 Vertical PWC Lift is designed for waterfront owners who want more width, more protection, and a premium lift setup for their personal watercraft. With a 1,200 lb lifting capacity and a 96" inside width, the 1296 is a strong fit for many larger Sea-Doo, Yamaha WaveRunner, Kawasaki Jet Ski, and other high-end PWC models when the fully loaded weight stays within the lift rating.
Unlike lower-profile storage options, this vertical PWC lift raises your watercraft up and out of the water to help reduce hull exposure, waterline staining, algae growth, and day-to-day dock wear. The vertical lift design also makes it a practical option for shorelines where water levels fluctuate during the season.
Wide 96" Inside Width
The 1296 model gives you significantly more inside width than ShoreMaster’s narrower PWC lift models, making it a smart choice for larger hulls or customers who want more room around the craft during loading and storage. If you are comparing the 1264 and 1296, the 1296 is the model to look at when width and canopy coverage are priorities.
Welded Aluminum Construction
The ShoreMaster 1296 is built with a welded aluminum frame designed for strength, corrosion resistance, and low seasonal maintenance. Stainless and brass hardware components help the lift perform smoothly while reducing rust concerns over time.
Easy Side Access with V-Side Design
ShoreMaster’s V-side frame design makes boarding and dismounting easier from the side of the lift. That is especially useful when the lift is installed beside a dock, seawall, or walking platform where quick access matters.
Important Fitment Note
Always confirm the fully loaded weight of your PWC before ordering. The total lifted weight includes the watercraft, fuel, battery, accessories, and any gear stored on board. Do not exceed the lift’s 1,200 lb capacity.
Carpeted bunks are required and sold separately. Choose the appropriate 8' or 11' carpeted bunk set based on your PWC length, hull shape, and support needs.
What’s Included
- ShoreMaster 1296 vertical PWC lift frame
- Manual winch and wheel
- Lift cables and pulley components
- Frame assembly hardware
- Foot pads and leg posts
- Assembly instructions
Sold Separately / Recommended Add-Ons
Add-On Why It Matters 8' Carpeted Bunks Required support option for many standard PWC applications. 11' Carpeted Bunks Better choice for longer hulls or customers wanting more bunk support. 21" Winch Extension with Cable Raises the winch wheel for easier operation, especially in deeper or uneven shoreline setups. ShoreMaster Canopy System Adds shade and weather protection; available up to 21' for this lift. Local Dealer Installation Recommended for customers who want a turnkey install, canopy setup, or shoreline-specific guidance. -
- 1,200 lb Capacity — Built for many larger and premium personal watercraft models when fully loaded weight is under 1,200 lb.
- 96" Inside Width — Wider cradle area for larger PWC hulls and easier loading alignment.
- Vertical Lift Design — A strong option for shallow or fluctuating water conditions.
- 50" Lift Travel — Helps raise the PWC securely out of the water for storage.
- Welded Aluminum Frame — Lightweight, durable, corrosion-resistant construction designed for long-term waterfront use.
- V-Side Access — Easier side boarding and dismounting from the dock.
- Canopy Compatible — Works with ShoreMaster canopy systems up to 21' for added weather and UV protection.
- Optional 21" Winch Extension — Raises the winch wheel for more comfortable operation.
- Low-Maintenance Design — Aluminum construction with stainless/brass hardware components helps reduce seasonal maintenance.
- Dealer and DIY Friendly — Designed for seasonal waterfront use with straightforward setup and serviceable components.
Specifications
Brand ShoreMaster Model 1296 PWC Lift Style Vertical PWC Lift Capacity 1,200 lb / 544 kg Inside Width 96 in Lift Travel 50 in Standard Leg Length 24 in Overall Width 104 in Overall Length 108 in Standard Winch DL 1202 Frame Material Welded Aluminum Canopy Compatibility Up to 21 ft Required Bunks Carpeted bunks, sold separately Compatible Bunk Lengths 8 ft or 11 ft Optional Accessory 21 in Winch Extension with Cable
Shop featured products
5,000 lbs Aluminum 4-piling Boat Lift
$9,453.00
Aluminum Boathouse Lift
$6,154.00 - $9,904.00
7,000 lbs Aluminum 4-piling Boat Lift
$9,466.00
10,000 lbs Aluminum 4-Piling Boat Lift
$10,023.00
13,000 lbs Aluminum 4-piling Boat Lift
$10,714.00
16,000 lbs Aluminum 4-piling Boat Lift
$12,163.00
Aluminum Elevator Boat Lifts
$10,868.00 - $11,738.00
Tide Tamer Aluminum Dual Piling Lifts
$6,457.00 - $7,759.00
Free Shipping
Free Shipping
Free Shipping
